low noise amplifier-lna-research papers recent 2014


A low noise amplifier (LNA) is utilized in various aspects of wireless communications, including wireless LANs, cellular communications, and satellite communications. A typical receiver for a radio frequency signal (RF signal) comprises a combination of an amplifier and a mixer for signal amplification and frequency conversion. The amplifier, usually a low-noise amplifier (LNA), receives the RF signal, amplifies the RF signal and feeds the amplified RF signal to the mixer which in addition receives a local signal from a local oscillator (LO). A critical building block in a radio receiver is the low noise amplifier (LNA). The LNA amplifies the received signal and boosts its power above the noise level produced by subsequent circuits. An LNA provides a steady gain over a specified frequency bandwidth. One common application is the use of a LNA as the input stage of a receiving circuit, such as in a mobile communication device. In a radio frequency (RF) signal receiving apparatus such as a cellular phone and a base station of a wireless communication system, a received signal has very weak intensity and includes considerable noise mixed therein. As such, the performance of the LNA greatly affects the sensitivity of the radio receiver. The low noise amplifier is capable of decreasing most of the incoming noise and amplifying a desired signal within a certain frequency range to increase the signal to noise ratio (SNR) of the communication system and improve the quality of received signal as well. Depending on signal frequency, an LNA can be implemented as an open loop or closed-loop amplifier and may also have a requirement to match a specific source impedance

A Review of LNA Topologies for Wireless Applications
free download
Abstract:This paper presents the reviews of few previous works for low noise amplifier design (LNA). This paper will explore several recent architectures of LNA but focused on four techniques of topologies which are forward body bias, self-biased inverter, common

LNA-modified isothermal oligonucleotide microarray for differentiating bacilli of similar origin
free download
Identification of bacteria plays an important role in clinical diagnosis, drug screening, food inspection, agricultural product monitoring and many others. Quick identification of the infectious agents and faster differentiation of pathogenic bacteria can provide effective

A Low-Noise and Low-Power LNA and Mixer for 24-GHz Application
free download
Abstract-This paper presents the design of a low-voltage and low-power frontend. It consists of a low noise amplifier (LNA) which integrates with mixer, and downconverts an 24-GHz RF input signal to an IF of 8-GHz. The first stage (LNA) uses complementary-push-pull

Design of 3.1-10.6 GHz CMOS LNA Based on Input Matching Technique of Common-Gate Topology
free download


An X-Ku Band Distributed GaN LNA MMIC with High Gain
free download
(LNA) using 0.25-µm Gallium-Nitride (GaN) MMIC technology is presented. The LNA shows 8 GHz to 15 GHz operation by a distributed amplifier architecture and high gain with an additional common source amplifier as a mid-stage. The measurement results show a flat

Simulation of Cascode LNA Using Ladder Matching Networks for Wireless Applications
free download
Abstract: This paper presents a design of Cascode LNA using ladder matching network applicable for wireless applications. It's using the FHX76LP Low Noise SuperHEMT FET transistor. The LNA designed used Ladder-matching network consisting of lump reactive

A Low Power SiGe-BiCMOS LNA for COMPASS Applications
free download
Page 1. A Low Power SiGe-BiCMOS LNA for COMPASS Applications Yu Bingliang 1,2 LI Jin 3 Li Wenyuan 3 Southeast University, Nanjing 210096, China email: ybl1964@163.com Keywords: SiGe-BiCMOS LNA; resistive feedback; inductively degenerated Abstract.

A Low Power 5.8 GHz Fully Integrated CMOS LNA for Wireless Applications
free download
Abstract A low power 5.8 GHz fully integrated CMOS low noise amplifier (LNA) with on chip spiral inductors for wireless applications is designed based on TSMC 0.18 µm technology in this paper. The cascode structure and power-constrained simultaneous noise and input

A 3.5 GHz Low-Noise Amplifier in 0.35 µm GaN HEMT on Si-Substrate for WiMAX Applications
free download
Abstract:This paper presents an 3.5 GHz low noise amplifier that uses a two-stage configuration, using 0.35 µm AlGaN/GaN HEMT on silicon substrate technology. The first stage has a cascode topology to achieve high gain, better stability and well reverse

A high gain CMOS low noise amplifier for 3.6 GHz applications using current-reused topology and noise canceling technique
free download
In the past decade, a large number of good architectures of LNA have been published [1, 2, 3]. LNA is the first gain stage of receivers and can dominate the noise problem for following stages and also provides enough gain to signal processing [4]. To date, LNA designers

A wideband MMIC low noise amplifier with series and shunt feedback
free download
Abstract:A two-stage MMIC low noise amplifier design is presented using series and shunt feedbacks to achieve simultaneously low noise, input matching and gain flatness performances across the frequency range of 4 to 12 GHz. The amplifier fits into a small die

Improved Design of Low Noise Amplifier
free download
Abstract This paper addresses Low Noise Amplifier design which is also known as LNA for any application in wireless communication system. LNA is a very important part in RF receiver because when using a LNA noise can reduced by the gain by the amplifier when

Design and analysis of a 3.1–10.6 GHz Ultra-Wideband Low Noise Amplifier in 0.13 µm CMOS
free download
Abstract:In this paper, a new low complexity ultra-wideband (UWB) 3–10.6 GHz low noise amplifier (LNA) is designed which is consisted of three stages. To overcome the input stage constraints such as broadband impedance matching and high gain while keeping low-

Design and Optimization of a Very Low Noise Amplifier using Particle Swarm Optimization Technique
free download
In today's communication system low noise amplifier (LNA) function is the first level of amplification of the signal received from the antenna. The LNA function plays an incontrovertible importance part in the receiver functionality and design process. The most

A 1.2 V, CMOS Differential Low Noise Amplifier with Low Noise Low Power for Bluetooth Receiver.
free download
Abstract A differential Low-noise Amplifier (DLNA) using 0.13 µm CMOS technology is presented. The amplifier is optimized for Bluetooth Receiver applications operating in the 2.4-2.5 GHz band. The inductive degeneration topology used in the DLNA provides low

Design and simulation of S-band low noise amplifier based on ATF-54143
free download
Abstract. This design used a low noise enhanced high electron mobility transistor ATF54143 and Agilent's ADS simulation software to achieve the good performance of operating frequency at 2.45 GHz, noise figure (NF) is less than 0.8 dB, band gain (S21) is greater

Low Noise High Gain Operational Amplifier Design using Positive Feedback at Load and Diffrential End
free download
Abstract The paper represents low noise, high gain differential amplifier circuit using positive feedback at load and at differential end to increase gain. The circuit is designed with short- channel MOSFETs, low noise, and low voltage, resulting in DC gain amendment over a

A Low Power Low Noise Chopper-Stabilized Tow-stage Operational Amplifier for Portable Bio-potential Acquisition Systems Using 90 nm Technology
free download
Abstract This paper presents a high performance chopper-Stabilized Two-stage operational amplifier for biomedical applications. This Two-stage is designed for low noise, low power, high PSRR and high CMRR. The Miller compensation technique (Cc) is used with a

DESIGN AND ANALYSIS OF LOW NOISE AMPLIFIER USING CADENCE.
free download
ABSTRACT Low Noise Amplifier also known as LNA is one of the most significant component for application in wireless communication system. It is a very important part in RF receiver because it can reduce noise of gain by the amplifier when the noise of the

Performance Comparison of Various Low Noise-High Speed Amplifier Topologies for GPS Applications
free download
Abstract The low noise high speed amplifier is the key component in any receiver system. In receiver front-end, low noise amplifier plays an important role in GPS applications. This paper presents the comparison of various topologies of LNA depending on performance

LOW NOISE LOW POWER TRANSIMPEDANCE AMPLIFIER IN 0.18 µM CMOS TECHNOLOGY.
free download
ABSTRACT Low noise and low Power transimpedance amplifiers (TIA) are essential modules for optical sensor based systems. But low power and low noise TIAs are still a challenge for the scientists despite of rapid advances in complementary metal oxide

RF CMOS Low Noise Amplifier Design-A Case Study
free download
Abstract A design methodology of Differential Design of CMOS low noise amplifier (LNA) with source degeneration for Bluetooth frequency is presented. The results show that the proposed topology is effective and can be used to achieve the minimum noise figure at all

A W-band Simultaneously Matched Power and Noise Low Noise Amplifier Using CMOS 0.13 µm
free download
Abstract A complete procedure for the design of W-band low noise amplifier in MMIC technology is presented. The design is based on a simultaneously power and noise matched technique. For implementing the method, scalable bilateral transistor model

A High-Gain and Low-Noise 0.9 µW Operational Amplifier
free download
Abstract A low-voltage, low-power, high-gain and low-noise operational transconductance amplifier (OTA) by modifying conventional one is presented and analyzed. Design strategies are discussed for minimizing noise and increasing gain. The simulation results show that

Low Noise Amplifier Circuit Design for C-band Satellite Transponder Model
free download
Abstract: This paper presents the low noise amplifier (LNA) circuit design for 6GHz in communication satellite transponder. To amplify the received signal in a communication satellite system, a LNA is required. An LNA design in RF circuits requires many important



CSE PROJECTS

FREE IEEE PAPER AND PROJECTS

FREE IEEE PAPER