thermal engineering 2017 IEEE PAPER



Thermal Engineering is a specialised sub-discipline of Mechanical Engineering that deals exclusively with heat energy and its transfer between not only different mediums, but also into other usable forms of energy. The thermal engineering is heat transfer, thermodynamics, energy conversion, and HVAC applications. One or more of the following disciplines may be involved in solving a particular thermal engineering problem: Thermodynamics. Fluid mechanics. Heat transfer. Optimization problems commonly found in engineering are divided into three categories. These categories are briefly mentioned next, in order of increasing complexity. The simplest type of optimization problem asks to find the values of independent variables, which

Thermal Science and Engineering Progress
free download

The phenomenon of the heat and mass transfer of the fluid and dust particles through a channel has some applications in industry such as: polymer technology, electrostatic precipitation, petroleum industry, fluid droplet sprays, use of dust in gas cooling systems,

Thermal Science and Engineering Progress
free download

In this study, thermal performance analysis of a natural convection porous fin with temperaturedependent thermal conductivity and internal heat generation is carried out using Galerkins method of weighted residual. The developed symbolic heat transfer models are

Thermal Science and Engineering Progress
free download

Higher heat transfer rate in a small volume sometime required for practical applications in many engineering fields. Various techniques and methodologies such as increasing either the heat transfer surface or the heat transfer coefficient between the fluid and the surface are

Thermal Science and Engineering Progress
free download

Characteristics of heat transport mechanism in three-dimensional ferrofluid flow past a deformed surface subjected to the Coriolis and Lorentz forces are analyzed. The impacts of Joule heating, nonlinear thermal radiation, viscous dissipation and convective condition are

Thermal Science and Engineering Progress
free download

The thermal development phenomenon in foam-like conductive porous media, eg open-cell metal foam, is investigated via simulation. A typical cell of commercial metal foam was geometrically idealized while maintaining its actual structural features as much as possible.

Thermal Science and Engineering Progress
free download

Increase in population and demand for higher standard of living has boosted energy consumption in the world wide. This has been resulted in energy shortages, environmental problems as well as so many issues which may be notified in the next decades. Therefore,

Case Studies in Thermal Engineering
free download

ABSTRACT Using baffles in exhaust mufflers is known to improve their transmission loss. The baffle cut ratio should affect the muffler performance analogous to a shell-and-tube heat exchanger. To the authors knowledge, there is no previous assessment reported in

Case Studies in Thermal Engineering
free download

ABSTRACT This work presents an experimental study of H20-NH3-H2 diffusion absorption refrigeration under two types of energy sources, ie the conventional electric energy from grid (electric) and exhaust gas from internal combustion engine. Dynamic method is used to

Case Studies in Thermal Engineering
free download

ABSTRACT In the present study, the effect of operational and geometrical parameters on the thermal effectiveness of shell and helically coiled tube heat exchangers was investigated. Analysis was performed for the steady state. The working fluid of both sides is water, that its

Case Studies in Thermal Engineering
free download

ABSTRACT The paper investigates some heat and mass transfer parameters (HMTPs) of three varieties of cocoyam slice and their vitamin B retention level in convective drying. The varieties include Colocasia esculenta (COE) and xanthosoma sagittiffolium (white flesh

Thermal Science and Engineering Progress
free download

The results of an analysis are discussed in this paper considering R1234yf, R444A and R445A refrigerants having low Global Warming Potential (GWP) which can be used in the mobile air conditioning systems. The evaporation temperatures of À5 C and+ 5 C while

OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY PEDESTRAIN DETECTION BY VIDEO PROCESSING USING THERMAL AND NIGHT VISION
free download

ABSTRACT The paper describes the use of thermal camera and IR night vision system for the detection of Pedestrians and objects that may cause accident at night time. As per the survey most of the accidents cause is due to low vision ability of human at night time, which

Engineering Problems of a New Thermal Seawater Desalination Technology
free download

Abstract: A new thermal seawater desalination technology was introduced in this paper. The influencing law of temperature difference between fresh water and seawater on heat utilization was disclosed and a performance evaluation theory for the water-heat ratio-based

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY HAZARD ANALYSIS AND RISK ASSESSMENT IN THERMAL
free download

ABSTRACT This project deals with various types of hazard analysis and finding a risk assessment in thermal power plant. The safe working operation of a thermal plant needs to identify the hazards, assess the associated risks and bring the risks to tolerable level on a

Investigation of Thermal Comfort Conditions in Higher Education Facilities: A Case Study for Engineering Faculty in Edirne
free download

Abstract In this study, a higher education institution in Edirne (Trakya University Engineering Faculty) is investigated for indoor thermal comfort conditions of the classrooms (indoor temperature, relative humidity, average radiant temperature, Satisfaction from

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY ENHANCEMENT IN DESIGN AND THERMAL ANALYSIS OF DISC
free download

ABSTRACT In automobile field, the contributions of composite materials are appreciable but cast iron is commonly used material for disc brake. Composite materials are less in weight and have more strength to weight ratio which can be chosen as an alternate material for disc

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY PREPARATION, CHARACTERIZATION AND THERMAL
free download

ABSTRACT The present article deals with the synthesis of phenolic epoxy resin by the reaction of phenolic resin and epichlorohydrin. The synthesis of phenolic resin was carried out by using p-ethylphenol, formaldehyde and naphthol. The structures of phenolic and

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY SLIP EFFECT ON MHD FLOW AND HEAT TRANSFER OF
free download

ABSTRACT Analysis has been conducted to analyze the effects of second order slip flow and heat transfer of Jeffrey nanofluid over a stretching sheet with non linear thermal radiation and chemical reaction. The effects of Brownian motion and thermophoresis occur

JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY DESIGNTRANSIENT ANALYSIS OF THERMAL SHUT-OFF VALVE FOR THERMAL
free download

ABSTRACT Most flow applications require valve for flow of liquid, and usually the parameter of concern is the Most flow applications require regulating the flow of liquid, and usually the parameter of concern is the finite element analysis. There are many authors work on this pressure valve

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY EFFECT OF NANOIRON ON MECHANICAL AND THERMAL
free download

ABSTRACT We reports on blend nanocomposites, which are two highly dissolve nanoparticles are using as chemical reduction method. Blend is prepared using epoxy and polyester in which filler as nanoiron was dispersed to evaluate mechanical and thermal

Thermal Science and Engineering Progress
free download

Thermal energy storage (TES) technologies utilizing phase change materials (PCMs) have been extensively investigated and developed in the last three decades. A great deal of previous research into PCMs has focused on their reliability and stability after a number of

Thermal Science and Engineering Progress
free download

Thermal behavior of nanocomposite phase change materials, Myo-inostol (MI)(a sugar alcohol) added with graphene nanoplatelets (GNN) as a solar thermal energy storage system, for use in the temperature range of 100 260 C was studied. GNN is added to MI with

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCESRESEARCH TECHNOLOGY STRUCTURE AND THERMAL ANALYSIS OF INTEGRAL SHAFT
free download

ABSTRACT An integral shaft bearing is popular for carrying higher specific load capacity, preventing misalignment defects and eliminating the risk of undesirable distortion of bearings, in compression to any other bearings. Integral shaft bearing are used to reduced

INFRARED THERMOGRAPHY IN CIVIL ENGINEERING: FROM NON DESTRUCTIVE TESTING IN LABORATORY TO OUTDOOR THERMAL MONITORING
free download

ABSTRACT Being able to perform full field easily noninvasive diagnostics for surveillance and monitoring of transport infrastructures and structures is a major preoccupation of many technical offices. Among all the existing electromagnetic methods, active infrared

thermal engineering old IEEE PAPER





Applied mathematical software and a web-based interactive handbook for thermal engineering: Problems and solutions
free download

Abstract A new area in information technology (IT) for power engineering, interactive Internet handbooks for thermal and power engineering, is considered. The already available Such documents are published not only for reading (this was also done before), but also for carrying out full valued calculations using them. These documents allow a user to change initial data and obtain an answer in numerical and graphic forms, as well as all interme diate results of computation Abstract The calculations of reduction of the rate of scale formation at heat exchanger walls with time are presented. A physical model describing a decrease in the scale formation by decreasing the area of the wall surface of the heat exchanger in comparison with the surface

Cloudservice on the properties of working media for thermal engineering calculations
free download

Those wishing to calculate cycles of steam turbine, gas turbine, and combined cycle installations must know the thermodynamic properties of the working media (water and/or steam, air, flue gases, etc.) involved. When these calculations are performedmanually , it is possible to use Abstract Questions pertinent to making the thermal deaeration of feedwater flows more energy efficient, the advisability of using chemical methods for final deoxygenation of feedwater, and checking the tightness of vacuum systems used in turbine units are Abstract Methods of thermal reprocessing of wood and peat to obtain high-calorific gas mixtures are considered. The comparison of the existing technologies and those under development as to heating values of the gas mixtures obtained, quantitative yield of these Abstract The parameters playing an important role in implementing a technology of preparing coal for combustion by subjecting it to plasma-assisted thermalchemical treatment are considered, and their effect on the main characteristics of the obtained product Automated evaluation of the energy efficiency of chemical engineering systems is considered by the example of phosphorus production. Possible phosphorus production flowsheet solutions are obtained, which allow one to increase the energy and exergy

Scanning the special issue on on-chip thermal engineering
free download

HEATING and thermal management are among the key factors limiting the performance of future integrated circuit (IC) chips. As feature sizes decrease and clock frequencies increase, overall power dissipation, heat generation density, and chip heat flux all increase. This

Introduction to thermal systems engineering
free download

Concise presentation and flexible approach readily tailored to individual instructional needs. Topics are carefully structured to allow faculty wide latitude in choosing the coverage they provide to studentswith no loss in continuity. The accompanying CD-ROM provides

Introduction to thermal and fluids engineering
free download

AGI-Information Management Consultants May be used for personal purporses only or by libraries associated to dandelon.com network.CHAPTER 1 INTRODUCTION TO THERMAL AND FLUIDS ENGINEERING 11.1 Overview of Thermal and Fluids Systems 1 1.2 Thermal

Correlation of thermal accommodation coefficient for engineering surfaces
free download

ABSTRACT An expression for predicting thermal accommodation coeffi-cient (TAC) of engineering surfaces is developed by correlating experimental data. The correlation is general and can be used for any combination of gases and solid surfaces for a wide tem-

Virtual thermal comfort engineering
free download

Abstract: Simulation of passenger compartment climatic conditions is becoming increasingly important as a complement to wind tunnel and field testing to help achieve improved thermal comfort while reducing vehicle development time and cost. Delphi Harrison Thermal

On developments in interactive web-based learning modules in a thermal-fluids engineering course
free download

The main objective of this study is to investigate how the traditional lecture format in engineering education might be complemented and enhanced by computer-based teaching and learning methods. We consider the development of Web-based learning modules for

Weaving a Theme of an Engineering Firm through the Projects of Thermal Design Courses
free download

The Rhino Thermal Engineering Company has recently received a contract to provide a residential construction company with technical support for the mechanical aspects of their projects, including heating, ventilation, air conditioning, and plumbing. One of the first

Thermal engineering for the construction of large concrete arch dams
free download

ABSTRACT Concrete arch dams are typically constructed from individual cantilever blocks, as illustrated in Fig. 1, using approximately 10thick mass concrete placements or lifts to build up each block. During placement and the initial curing of a lift, water is circulated

Derivation and analysis of the indoor wet bulb globe temperature index (WBGT) with a human thermal engineering approach, part 1. Properties of the WBGT
free download

SUMMARY Based on a heat balance equation between humans and the environment, the authors developed a theoretical derivation of the indoor WBGT formula, which was originally established empirically by Yaglou and Minard. We demonstrated that the coefficients of wet

A thermal sensation model for use by the engineering profession
free download

Abstract: ASHRAE has funded a research project entitled, Selecting and Preparing a Thermal Sensation Model for Use by the Profession.This report describes how the model was developed and introduces a Windows™ software package that was developed during

Terrestrial laser scanning for deformation monitoring of the thermal pipeline traversed subway tunnel engineering
free download

ABSTRACT: As a kind of modern vehicle, more and more subway lines appear in order to meet the need of urban transportation. Abuilding Beijing subway line 10 is traversed by a thermal pipeline in China. To ensure the progress and safety of the subway tunnel, the

Boundary value problems in building physics-thermal engineering of buildings
free download

Abstract. The paper deals with applications of the parabolic partial differential equations with Newton boundary conditions in building physics. The stipulating of the temperature field in the domain-building construction or its part-stands obviously at the beginning of the solving Experience in the freezing of soils, using the ambient air with a natural below-zero temperature, is not exten- sive up to the present, but there is much promise for this method in the construction of installations in the Far North. The theoretical basis of the thermal engineering

The Use of a Semester Long Theme Problem in a Senior Level Thermal Engineering Course
free download

Abstract Formerly, a senior level capstone course in thermal engineering (ME 411 Applied Thermal Science) was a required part of the curriculum in mechanical engineering at Michigan State University. The intent of the course was to culminate several aspects of Polymers are increasingly used in tribological applications, because of their self-lubricating ability, corrosion resistance and chemical compatibility. However, their performance depends strongly on the parameters of the total tribological system. Not only polymer

Engineering design of the thermal properties in smart and adaptive knitting structures
free download

Abstract: This work reports on research being carried out in thermal comfort in smart and adaptive knitting structures (functional structures). The total comfort of a garment comprises not only the sensorial, thermal and physiological component, but also aesthetic, colour and

Physical Model Generation in Thermal Engineering Problems described by Partial Differential Equations
free download

Abstract Model generation has emergcd as a key task in engineering design and analysis. Al research in this area has focusedon model based reasoning emphasising qualitative models in attempting to automate this process. In this paper, we propose that this work on

Reliability engineering and robust design: new methods for thermal/fluid engineering
free download

ABSTRACT Recent years have witnessed more improvement to the SINDA/FLUINT thermohydraulic analyzer than at any other time in its long history. These improvements have included not only expansions in analytic power, but also the additions of high-level

Derivation and analysis of the outdoor Wet Bulb Globe Temperature index (WBGT) with a human thermal engineering approachPart 2. Properties of the
free download

SUMMARY The authors present a theoretical derivation of the WBGT formula for outdoor conditions that was originally developed from the results of experiments on human subjects, based on a heat balance equation between the human body and its outdoor environment.

Periodic nanostructures for thermal engineering applications
free download

The work presented in this thesis has been carried out at the Department of Physics and Nanoscience Center at the University of First, I would like to thank my advisor, Professor Ilari Maasilta for the opportunity to work on such interesting projects and for his

Thermal management and engineering economics in CPV design
free download

Page 1. EMCORE PROPRIETARY INFORMATION Thermal Management and Engineering Economics in CPV Design Phil Blumenfeld Principal Mechanical Engineer Emcore Corp.Rapidly switch to a small, calibrated, excitation current to sense cell temperatureRepeat for increasing

Optimization of engineering solutions for thermal stabilization of saline permafrost soils at bases of structures by means of two-phase heat pipes
free download

Abstract Construction on saline permafrost soils is an actual engineering problem. Its solution would be impossible without soils thermal control and thermal stabilization for preventing dangerous cryogenic processes and their negative consequences concerned

Laser rapid thermal annealing of quantum semiconductor wafers: a one step bandgap engineering technique
free download

Abstract We report on a new Laser Rapid Thermal Annealing (Laser-RTA) technique for one- step bandgap engineering at selected areas of quantum semiconductor wafers. The technique is based on using a 150 W 980 nm fiber coupled laser diode and a 30 W TEM00

Measurement of the physical properties of engineering thermoplastics using thermal analysis
free download

- Thermogravimetric Analysis (TGA) measures weight changes associated with thermal events. While TGA is most commonly used to determine compositional analysis, it is also valuable for determining thermal stability. Furthermore, by analyzing multiple TGA curves obtained under

Reverse engineering of polymeric multilayers using AFM-based nanoscale IR spectroscopy and thermal analysis
free download

The identification of unknown multilayer samples is quite similar to solving a Sudoku number puzzle, in which the final solution is deduced from stitching together bits of information in a coherent manner. Often, extraction of such data from ultra-thin layers (< 5 µm) is limited due

Integration of statistics and food process engineering: Assessing the uncertainty of thermal processing and shelf-life estimations
free download

SUMMARY In response to recent requirements in food regulations, new procedures are now necessary to evaluate the impact of the variability in the parameters of food engineering models used for decisions of safe processing, packaging, storage and distribution

Modelling of Engineering Thermal Problems: An Implementation Using CBR with Derivational Analogy
free download

Abstract An interactive cased based reasoning tool for assisting engineers with the mathematical modelling tasks associated with the analysis of thermal problems is described. By representing fundamental thermal modelling scenarios as cases, complex physical

Engineering model for thermal mismatch stresses at the interface of a non-uniformly heated two layer structure
free download

Abstract The model proposed by Suhir2 for the shearing and peeling stresses occurring at the interface of two thin bonded objects is extended to take care of different temperatures in the two layers. The results are presented in terms of two ratios, mand n, relating the two

ENGPAPER.COM CSE PROJECTS

FREE IEEE PAPER AND PROJECTS

FREE IEEE PAPER