embedded system-24

An Embedded Data System With Free-Space Optical Data Transmissions and Magnetic Power Coupling
H Kumagai ,PROCEEDINGS OF THE , 1997 ,aerospacecomputing.com
Los Altos, California KEYWORDS Embedded System, Data Acquisition, Optical Data
Transmissions, Magnetic Power Transmission, PC/104, SDLC/HDLC ABSTRACT A small data
acquisition system based on an embedded system has been developed. 

A Modular, Multiple Sensor Embedded System CMM Motion Controller
DW Changa, JOH Peng Wua, JE Petersonb ,ASPE Summer 2003 , 2003 ,aspe.net
Abstract This paper describes design, development, and implementation of an embedded
system style CMM controller. A single Intel Pentium microprocessor performs all functions
including real time motion control. Boot up is via a solid state IDE flash disk to the Phar 

Embedded System Level Self-Test for Mixed-Signal IO Verification
V Loukusa ,Journal of Electronic Testing, 2006 ,Springer
Abstract This article presents an embedded system level self-test implementation for
verification of a peripheral and its connectivity to the system. The self-test enables to perform
a test for verifying the IO connectivity from inside the system. The proposed on-chip-testing 

Selecting the best battery for embedded-system applications
K Odland ,EDN (Electrical Design News), 2010 ,edn.com
Nonrechargeable, or pri-mary, batteries find wide use in mainstream embedded-system
applications (Table 1). This category of batteries includes alkaline devices, which
manufacturers typically fabricate using manganese dioxide and zinc powder with a caustic 

Standard API Would Significantly Accelerate Embedded System Development
S Gal-Oz ,REAL TIME MAGAZINE, 1999 ,es2.be
2. Events, which are usually interrupts intercepted by the hardware. Once received, the
building block contains a placeholder for the event handling. 3. Data items that store the
state of the building block. These data items contain values that the building block uses for 

Real time mobile lane detection system on PXA255 embedded system
MJ Jeng, PC Hsueh, CW Yeh, PY Hsiao ,International Journal of , 2007 ,naun.org
Abstract—In this paper, we present a real time mobile lane detection system (LDS) based on
PXA255 embedded system. The software with generic 2-D Gaussian smoothing filters
includes the power-of-two approximation algorithm for the Gaussian coefficients which is 

A Methodology for Embedded System Design supporting Layered Platforms
S Förster, A Windisch, M Fischer, D Monjau ,Proceedings of the Forum ,i-tecs.fr
Abstract This paper introduces a formal methodology for distributed embedded system
design. Methods providing means to capture system specification as well as implementation
aspects are presented. The focus of this paper is the unique capability of modelling 

Design of a learning environment for embedded system
T Gonçalves, A Espírito-Santo, BJF Ribeiro ,Proceedings of the , 2010 ,iaeng.org
Abstract—Embedded systems have an everyday presence and direct impact in our lives.
Therefore, Universities are continuously improving their courses in microprocessor and
embedded programming. Although the diversity of curriculums, the availability of learning 

Derivation of Executable Test Models from Embedded System Models Using Model Driven Architecture Artefacts-Automotive Domain
J Zander-Nowicka, I Schieferdecker ,Dagstuhl, Germany, , 2006 ,fokus.fraunhofer.de
Abstract: The approach towards system engineering compliant to Model-Driven Architecture
(MDA) implies an increased need for research on the automation of the model-based test
generation. This applies especially to embedded real-time system development where 

Performance issues of variability design for embedded system product lines.
O Lewis, M Mannion ,2000 ,researchrepository.napier.ac.uk
Copyright© Fraunhofer IESE 2000 7 Table of Contents Perspectives on Software Product
Lines: Report on First International Workshop on Software Product Lines: Economics,
Architectures, and Implications

requirements to a cross-domain embedded system architecture
R Obermaisser ,Proc. Embedded Real Time ,erts2010.moonaweb.com
Abstract: This paper gives an overview of the cross-domain component-based architecture
GENESYS for embedded systems. The development of this architecture has been driven by
key industrial challenges identified within the ARTEMIS Strategic Research Agenda (SRA) 

Acoustic Model Comparison for an Embedded Phoneme-based Mandarin Name Dialing System
X Zhu, R Wang, Y Chen, J Liu , Symposium on Chinese , 2002 ,isca-speech.org
QC. Although the models with full covariance matrix can obtain higher recognition
rate, their QM and QC is unbearable in any embedded system. By this reason the
finite Gaussian mixtures with diagonal covariance matrix. 4.4 

A Vision for Integration of Embedded System Properties-via a Model-Component-Aspect System Architecture
CD Gill ,Proceedings of the Monterey Workshop, 2003 ,cs.uic.edu
Abstract–Current approaches to developing complex embedded systems, particularly those
with constraints in addition to their functional requirements, suffer significant limitations when
moving from system requirements to implementation. Chief among these limitations is the 

Refactoring-based Executable UML Transformation for Embedded System Design
NA Zakaria, N Matsumoto ,Int. J. Comp. Sci. Net. Sec, 2009 ,paper.ijcsns.org
Summary Typical stepwise refinement is widely used in design process, but due to
increased design complexity a new way of designing is necessary. In this paper, we present
a system-level design methodology using Executable-UML (xUML) and Model Driven 

Embedded System Design Considerations
D Naylor ,White paper, 2002 ,application-notes.digchip.com
Introduction Today’s systems are composed of a hierarchy, or layers, of subsystems with
varying access times. Figure 1 depicts a layered performance pyramid with slower system
components in the wider, lower layers and faster components nearer the top. The upper 

Design and Development of fully automatic AT89C52 based low cost embedded system for rail tracking
SB Patil ,International Journal of electronic communication and ,ijecscse.org
Abstract—A real time low cost, low power and fully automatic an embedded system for
tracking and positioning of rail by using RFID, global positioning system (GPS) and global
system for mobile communication (GSM) is suggested. The current design is an 

Using CAD tools for embedded system design: Obstacles encountered in an automotive case study
P Koopman ,Integrated Computer Aided Engineering, 1998 ,IOS Press
Historically, digital system CAD research has emphasized increasing the size and
complexity of the largest feasible design. However, the success of embedded system design
efforts may depend more on design exibility and lifecycle cost optimization than on an 

Design and simulation of a PCI express based embedded system
F Nassar, J Haase, C Grimm ,IEEE Austrian , 2008 ,publik.tuwien.ac.at
Abstract In this paper, a brief introduction to the theory of PCI Express (PCIe) bus system is
given. In addition to that, the capabilities of this bus system are demonstrated by designing
and simulating a PCIe based embedded data communication system. This system utilizes 


embedded system-24 IEEE PAPER