Experimental Analysis of Machining Parameters on Turning with Single Point Cutting Tool
The metal cutting process for material removing in turning process using a single point tool on the work piece will influence, the machining parameters in terms of efficiency under variable cutting conditions such as speed of the spindle , feed rate and depth of the cute rate during the removal of material in the form of chips from the cylindrical work piece. The HSS Single point cutting tool is one of the important tool for machining operations in many manufacturing industries. In this paper, the experimental analysis is performed and the effect of parameters like variable speed on the spindle, depth of the cut and feed on surface roughness, tool life and MRR are determined and compared. The work piece choosen for the experiment is S50C medium carbon steel with HSS single point Cutting tool and the results are obtained, calculated and tabulated.
by P. H. J. Venkatesh | R. Rudrabhi Ramu | M. S. R. Viswanath “”Experimental Analysis of Machining Parameters on Turning with Single Point Cutting Tool””
Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,
URL: https://www.ijtsrd.com/papers/ijtsrd30932.pdf
ugcapprovedjournalswithlowpublicationfees, conferenceissuepublication