Influence of Penstock Outlet Diameter and Flat Blade Lateral Twist Angle on the Performance of A Simplified Pico Hydropower System IJTSRD
A study to investigate the influence of penstock outlet and the flat blade lateral twist angle on the performance of an existing Pico-hydro system was undertaken. Five penstock reduced from76.2 mm to 15, 17.5, 20, 22.5 and 25 mm diameters at the outlet and a runner with adjustable flat blades were fabricated from mild steel […]
CFD Analysis of a Double Pipe Heat Exchanger by using Fluid Based Nanomaterials IJTSRD
Double pipe heat exchanger design is a device which we using for heat transfer applications straightforward. This maintains one heat exchanger pipe inside another. After determining the required heat exchanger surface area, for either counter flow or parallel flow, the pipe sizes and number of bends for the double pipe heat exchanger can be selected. […]
Analysis of Thermal Criteria on Cryogenic Pressure Vessel IJTSRD
After a cryogenic liquid has been liquefied and purified to the desired level it should then be put away and transported. Cryogenic fluid storage-vessel and transfer line design has progressed rapidly as a result of the growing use of cryogenic liquids in many areas of engineering and science. The development of the Dewar vessel represented […]
Design Evaluation and Optimization of IC Engine Connecting Rods ‘“ A Review IJTSRD
Fatigue analysis and Optimization of connecting rod are the modern trend in automotive engineering industry emphasis on many parameters like total deformation, life, factor of safety, stress biaxiality and fatigue sensitivity. The main scope of this work comprises detailed review on various methods and procedures adopted by different researchers in Fatigue analysis of commercially used […]
Investigation on Dissimilar Metal Welds by Resistance Spot Welding Process IJTSRD
In the present scenario welding of dissimilar metals is very important because one metal cannot gives optimum chemical, physical and mechanical properties required for an application. Like Al-Steel or Mg-Al welding for reducing the weight of the transportation vehicles such as train, automobile, and ship, high alloy material-low alloy steel or stainless steel- low carbon […]