Performance and Emission Charecterstics of Diesel Engine Blended with Used Transformer Oil A Review IJTSRD
Our present fuel resources are not going to be around forever and with the ever increasing consumption their extinction is nearly unavoidable. Also our fuel resources which are mostly made up of fossil fuels are not renewable in nature. In the present study hydrogen at a constant flow rate of 4lpm was inducted in the […]
Optimization of Cutting Parameters in Turning Operation by Using Taguchi Method IJTSRD
In the present work, the work piece material taken is chrome-moly alloy steel. This is a hard material having hardness 48 HRC. This alloy steel bears high temperature and high pressure and its tensile strength is high. It is very resistive to corrosion and temperature. For these useful properties it is used in power generation […]
Experimental Investigation on Mineral Content of Fly Bottom Ash and Strength Characteristics of Fly Bottom Ash Bricks – A Review IJTSRD
This investigation is to study the mineral contents of fly-bottom ash. After many years of research in sustainable construction materials, the quality of producing construction materials has significantly improved. And the replacement of ordinary cement with fly-bottom ash has showed several improvements such as strength and other characteristics. During the production of ordinary cement, CO2 […]
Optimization of 36cm2 Effective Area on Serpentine Flow Channel of PEMFC IJTSRD
The Proton Exchange Membrane Fuel Cell (PEMFC) is an electrochemical device and its performance depends on the operating and design parameters. In this paper, optimization of design parameters like flow channel design, number of flow path, channel depth and width, cross section of the flow channel and operating parameters as operating pressure, temperature, relative humidity, […]
CFD Investigation on Nozzle Considering Fuel Properties of Alternative Fuel A Review IJTSRD
In this work multi phase flow and erosion analysis were done via simulations and CFD application for standard diesel and two alternative bio fuels, FAME and DME, inside different nozzle models and with various boundary conditions. Nozzle model consists of narrow channel with sharp type I or rounded type Y inlet section, with or without […]