A Study on Geopolymer with Dyeing Industry Effluent Treatment Plant Sludge IJTSRD
In this paper, it is envisaged to project a new composite material, which can be made from the existing non-degradable and hazardous waste materials. The composite material is a combination of Fly ash Geopolymer FAG and Dyeing Industry Effluent Treatment plant Sludge DIETP-S . The composite thus obtained is christened as Geopolymer-Dye Sludge Composite GDSC . It is the method of extracting wealth from the waste. In this research Sodium hydroxide NaOH solution of mole 10 was used as alkali activator for fly ash to manufacture FAG. Silica gel SG was added to one set of GDSC samples. The DIETP-S was used as inert filler in the FAG in various percentages. Curing was done at 80o C for 1 day. The compressive strength and leaching of chemicals into water as Total Dissolved solids TDS are studied. It is envisaged that this GDSC reduces the environmental hazards caused by fly ash from thermal power plants and sludge from dyeing industries.
by Raghunathan T “A Study on Geopolymer with Dyeing Industry Effluent Treatment Plant Sludge”
Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-1 , December 2018,
A Study on Geopolymer with Dyeing Industry Effluent Treatment Plant Sludge IJTSRD IEEE PAPER
Study of Mechanical Behavior for Tamarind Shell Powder and Coconut Coir Fiber Epoxy Composite for Aerospace Application IJTSRD
Enhancing the Channel Capacity of a Cellular Mobile System using Frequency Diversity IJTSRD