Design and Analysis of a Multistory Reinforced Concrete Frame in Different Seismic Zone ijtsrd
This study work focuses on the analysis of a structural system to determine the deformations and comparison of steel quantity of seismic zones. In this study, we have taken G 12 multi storied RC moment resisting framed structure building with the shear wall by analyzing the structure for gravity load, wind load and seismic loads for different cities. By Selecting four different cities on the basis of seismic zones zone II, zone III, zone IV, zone V and also considering that the basic wind speed. We have mainly focus on the structural system to determine the deformations and also forces induced by applied loads or ground excitation is an essential step in the design of a structure to resist earthquake. The analysis and design for all the cities are carried out using STAAD Pro’ and STAAD Foundation’ software which are industry standard software the world over. The wind resistant design is carried out as per IS 875 Part 3 1987 and the earthquake resistant design is carried out as per IS 1893 Part 1 2002. Analysis and design of beams, columns and shear wall have been done in STAAD Pro and the foundation is done in STAAD Foundation. We have also checked the design of some beams, columns, and footings manually and find correct. Design of RCC slabs is carried out manually for which an excel sheet is developed for working out moment coefficients for different edge conditions as per IS code. In this study work, we design and analyze a reinforced concrete frame structure in various seismic zones and we observing the variation in the behavior of the structure in various loading conditions.
by Priyatam Kumar | Vikash Kumar Singh “Design and Analysis of a Multistory Reinforced Concrete Frame in Different Seismic Zone” Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,
Design and Analysis of a Multistory Reinforced Concrete Frame in Different Seismic Zone ijtsrd IEEE PAPER
Modeling of DC Motor and Choosing the Best Gains for PID Controller ijtsrd
Behavior of Concrete Using Copper Slag As A Strength Parameter in Low Cost Construction Work ijtsrd