Enhancement of Heat Transfer Analysis and Optimization of Engine Fins of Varying Geometry IJTSRD


The Engine cylinder is one of the major automobile components, which is subjected to high temperature variations and thermal stresses. In order to cool the cylinder, fins are provided on the cylinder to increase the rate of heat transfer. By doing thermal analysis on the engine cylinder fins, it is helpful to know the heat dissipation inside the cylinder. The principle implemented in this project is to increase the heat dissipation rate by using the invisible working fluid, nothing but air. As know, by increasing the surface area we can increase the heat dissipation rate, so designing such a large complex engine is very difficult. The main purpose of using these cooling fins is to cool the engine cylinder by air. The main aim of the project is to analyse the thermal properties by varying geometry, material, distance between the fins and thickness of cylinder fins. Parametric models of cylinder with fins have been developed to predict the transient thermal behaviour. The models are created by varying the geometry circular and also by varying thickness of the fins for both geometries. The 3D modelling software used is Pro/Engineer. Thermal analysis is done on the cylinder fins to determine variation temperature distribution over time. The analysis is done using ANSYS. Thermal analysis determines temperatures and other thermal quantities. In this thesis, using materials cast iron, Copper and Aluminium alloy 6082 are also for cylinder fin body. Thermal analysis is done using all the three materials by changing geometries, distance between the fins and thickness of the fins for the actual model of the cylinder fin body.

By K. Karthikeyan | C. Saravanan | Dr. T. Senthil Kumar”Enhancement of Heat Transfer Analysis and Optimization of Engine Fins of Varying Geometry”

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd14327.pdf

http://www.ijtsrd.com/engineering/mechanical-engineering/14327/enhancement-of-heat-transfer-analysis-and-optimization-of-engine-fins-of-varying-geometry/k-karthikeyan

call for paper Manufacturing engineering, international journal Textile Engineering, ugc approved journals for engineering




Enhancement of Heat Transfer Analysis and Optimization of Engine Fins of Varying Geometry IJTSRD IEEE PAPER





2020 technology trends
2019-TOP-TECHNOLOGIES
2019 papers
2018-TOP-TECHNOLOGIES
2018 papers

IEEE PROJECTS 2019


IEEE PROJECTS CSE 2019
IEEE PROJECTS ECE 2019
IEEE PROJECTS EEE 2019
IEEE PROJECTS VLSI
IEEE PROJECTS EMBEDDED SYSTEM

IEEE PROJECTS


IEEE PROJECTS ECE
IEEE PROJECTS CSE COMPUTER SCIENCE
IEEE PROJECTS ELECTRICAL ENGINEERING
IEEE PROJECTS EEE

IEEE PROJECTS