Exterior Beam Column Joint An Assessment IJTSRD
In a multi-storied building, the beam-column joint is one of the most critical regions. Usually the beam-column joint was considered as rigid frames. Various researchers over the past years indicated that the joint is not rigid. Now it is also stated that instead of the failure in beam and column, failure can also occur in joint hence joint must be considered as a structural member. The Indian standards define a joint as the portion of the column within the depth of the deepest beam that frames into the column. In framed structures the bending moment and shear forces are maximum at the junction area. So, beam column joint is one of the failure zones. Among the beam column joints, the exterior joint is more critical. The exterior beam column joint have been a study for about 30 years since now. Still there are many more to be understood. In the present work a building is designed in STAAD. Pro V8i and an exterior beam column joint is considered. This joint is modelled in NX CAD and imported to ANSYS to analyse it to derive the shear stress and the corresponding deformation.
by Pramod Verma | Prof. Pratiksha Malviya “Exterior Beam Column Joint: An Assessment”
Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019,
Exterior Beam Column Joint An Assessment IJTSRD IEEE PAPER
Traffic Congestion – Causes and Solution: A Study of Kota City IJTSRD
Passive Damping Filter Design and Application for Three-Phase PV Grid-Connected Inverter IJTSRD