Multi-Objective Optimization of EDM Process Parameter by Topsis Method IJTSRD



In this study, MRR, SR, and HV in powder mixed electrical discharge machining PMEDM were multi criteria decision making MCDM by TOPSIS method. The process parameters used included work piece materials, electrode materials, electrode polarity, pulse on time, pulse off time, current, and titanium powder concentration. Some interaction pairs among the process parameters were also used to evaluate. The results showed that optimal process parameters, including ton = 20 µs, I= 6 A, tof = 57 µs, and 10 g l. The optimum characteristics were MRR = 38.79 mm3 min, SR = 2.71 m, and HV = 771.0 HV.

BY Nguyen Duc Luan | Nguyen Duc Minh | Le Thi Phuong Thanh “Multi-Objective Optimization of PMEDM Process Parameter by Topsis Method”

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23169.pdf

Paper URL: https://www.ijtsrd.com/engineering/manufacturing-engineering/23169/multi-objective-optimization-of-pmedm-process-parameter-by-topsis-method/nguyen-duc-luan

call for paper Chemical Engineering, international journal Food Engineering, ugc approved journals for engineering