Power Flow Analysis for Four Buses System by NR Method IJTSRD
Power flow studies provide a systematic mathematical approach for determination of various bus voltages, there phase angle, active and reactive power flows through different branches, generators and loads under steady state condition. In this paper, the purpose of power flow analysis is to determine four bus system power flows. Case studies have been performed on Lawpita Taungoo Kamarnat Hlawga 230kV Line Myanmar . This paper presents a reliable method to meet the requirements by developing a Newton Raphson based load flow calculation program through which control setting of Shunt Compensator can be determined directly. This program computes the voltage magnitude and angle at each bus in a power system under balanced steady state conditions. Real and reactive power flows for all buses, as well as line flow and line losses, are also computed. And then the compensation of shunt capacitor is proposed for load flow analysis and also for overall loss minimization and improvement in system voltage profile.
BY Wint Yu Yu Zaw “Power Flow Analysis for Four Buses System by NR Method”
Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,
Power Flow Analysis for Four Buses System by NR Method IJTSRD IEEE PAPER
Voltage Generation using Piezo Crystals IJTSRD
Performance and Emissions Analysis of VCR Engine Using Waste Mustard Cooking Oil IJTSRD