Potential of Neem Leaf Powder as Bio Adsorbents for Dye Colour Removal ijtsrd
In this study, two types of eco friendly and low cost bio adsorbents, Neem leaf powder NLP and acid treated Neem leaf powder TNLP were prepared for the removal of dye color from Congo red solution. The physicochemical parameters of the prepared absorbents were measured. The structural features of these absorbents were analyzed by FTIR, […]
Adsorption Characteristics and Behaviors of Natural Red Clay for Removal of BY28 from Aqueous Solutions IJTSRD
‘The present study deals with the analysis and adsorption of Basic Yellow 28 BY28 onto low-cost natural red clay NRC . Adsorbent characterized by XRD, SEM, TG DTA, BET and BJH. The effect of the contact time, the temperature, the initial concentration, the pH and the adsorbent mass and on adsorption process were investigated using […]
Removal of Pb II from Aqueous Solutions using Activated Carbon Prepared from Garlic Waste IJTSRD
The recent study explains about the removal of Pb II ions from aqueous solution using activated carbon prepared from Garlic waste. Garlic peels have been used for the production of Carbon by treating with conc.H2SO4 for metal ions removal. Fourier Transform Infrared Spectroscopy and Boehm titration have been used for various physicochemical characterization of the […]
Removal of Fluoride by Adsorption Using Fuller’s Earth IJTSRD
The presents study deals with the adsorption of fluoride by Fuller’ Earth. Batch adsorption studies were carried for removal of fluoride by using Fuller’ earth at different time, dosage and pH. It is observed that percentage removal of fluoride is increases with the increases in contact time and dosage. The optimum contact time is 71% […]
Dye Removal of Adsorption Study in Thespesia Populnea Seed IJTSRD
The potential of Thespesia Populnea Seed (TPS) powder, for the removal of Congo red 4B (CR) dye from aqueous solution was investigated. The adsorbent was characterized by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as pH, adsorbent dosage, initial dye concentration, contact time and temperature were studied to observe […]