Survey Datasets on Categories of Factors Mitigating Safety Practices on Construction Sites
Construction sites are known to be one of the most dangerous areas for human health and safety. In developing countries, enforcement of safety rules are often negligible to minimize occupational injuries and illnesses. The success of any construction project is highly depending on health and safety management and its objective is to obtain a clear […]
Modification of Bituminous Mix by Adding Waste Polythene
Bituminous mixes are most commonly used all over the world in flexible pavement construction. It consists of asphalt or bitumen which binds mineral aggregate to make a homogeneous mix, laid down in layers and then compacted. In normal condition, conventional flexible pavements if designed and constructed properly as per the specifications, perform quite satisfactorily but […]
Effects of Different Types of Sulphates and Concentrations on Steel
Steel which is indispensable in infrastructures, transportation and manufacturing has a major drawback which is its susceptibility to deterioration corrosion that causes economic damage. Some structural failures cannot be unconnected to steel deterioration. Different factors cause deterioration of steel and steel structures but less attention has been given to the sulphate attack based on surrounding […]
Experimental Investigation of Magnesium Phosphate Cement Based Concrete
This project shows the results of an experimental study on the Magnesium phosphate cement for repair work in concrete mixed with coarse aggregate and fine aggregate. The percentage of Magnesium phosphate cement used in concrete and cement was replaced with 0 , 5 and 10 . The effects of curing for 7, 14 and 28 […]
Partial Replacement of Natural Sand by Microfines for Cement Concrete
The purpose of this study was to investigate the PARTIAL REPLACEMENT OF NATURAL SAND BY MICROFINES FOR CEMENT CONCRETE. The suitability of crushed stone dust waste as a fine aggregate for concrete has been assessed by comparing its basic properties with that of conventional concrete. Two basic mixes were chosen for natural sand to achieve […]