Effect of Confinement on Reinforce Concrete Short Rectangular Column IJTSRD
In this paper presents a comparative investigation based on various types of effective confining material, like (stapled stirrups, WWM, welded spot stirrups, ferrocement, FRP).The transverse reinforcement plays an important role in the ductility of the column. The preparedness for the formation of the plastic hinges in column, it requires confinement of concrete by transverse reinforcement. […]
Comparative Study of Hybrid Fiber Reinforced Concrete Deep Beam under Shear IJTSRD
As per the Indian standard a beam shall be considered as deep beam when the ratio of effective span to overall depth is less than 2 for simply supported & 2.5 for continuous beam. Deep beam transfer the load by shearing action rather than flexural action. Shear strength of concrete beam is not well defined […]
Direct Tension Test on Expanded Metal Mesh and Welded Square Mesh for Ferrocement Composite IJTSRD
Ferrocement is a special type of mortar which is usually reinforced with steel wires which can perform very well as far as crack control, impact resistance and toughnes is concern. Ferrocement has very high tensile strength to weight ratio. This project presents an experimental study on Tensile strength of different wire meshes which normally used […]
Cost Optimization of Residential Structure by Life Cycle Cost Analysis IJTSRD
It is common that cost is the main criterion at the time of making choices between different systems. With life-cycle cost (LCC) calculations, it is possible to get better overview of the total cost. Life Cycle Cost (LCC) is ‘œthe total cost of owning, operating, maintaining, and disposing of a building or a building system’ […]
Thermal Stress Analysis of Homogeneous Orthotropic Plate with New Thermal Profiles Using First Order Shear Deformation Theory IJTSRD
Laminated composite plates are extensively used in Civil, Mechanical and Aerospace industries. A composite material is formed by combining two or more materials, so that the properties of the composites are different from those of the individual constituent’s materials. Laminated composites formed by fibres are bound together using binding material called ‘˜matrix’. The reinforcing fibers […]