CFD Analysis on Forced Convection Heat Transfer of KNO3–Ca NO3 2 TiO2 Molten Salt Nanofluid in Circular Tube
Nanotechnology has been a global movement in recent decades. The possibility of manipulating atomic and molecular materials has resulted in previously unimaginable properties and characteristics. The molten salt nanofluid created by integrating nanoparticles into molten salt has a much higher specific heat capacity and thermal conductivity than the base molten salt, resulting in a higher […]
CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchanger using Different Corrugated Channel Configurations
The flow properties of heat transfer across such corrugated channels are very distinct from parallel plate channels. The primary flow direction is parallel to the waviness of the channel of the corrugated channel, although the local flow direction is still changed due to the waviness of the channel. By flow recirculation, separation and re attachment, […]
Effects of Al2O3 Cu Water Hybrid Nanofluid on Heat Transfer of Double Pipe Heat Exchanger using CFD
The researchers have consistently observed higher heat transfer rates with different kinds of nanofluids among others, Al2O3, Cu, CuO, Fe3O4, Fe2O3, CNT, nickel, Nano diamond, TiO2, and SiO2 flow in a tube under laminar or turbulent flow conditions. The heat transfer enhancement of nanofluids depends on particle concentrations, thermal conductivity of nanoparticles and mass flow […]
A Review – Study of the Thermo-Physical Properties of PCM with Dispersion of Nano Particles IJTSRD
In this article, a new sort of nanofluid phase change materials (PCMs) is developed by suspending a small amount of BeO nanoparticles in solution of wax. Its thermal conductivities, super cooling degree, latent heat, specific heat, and rheological behaviours of the nanofluids PCMs have investigated. A rectangular duct designed and numerical studies were performed to […]
Preparation and Characterization of Green Synthesis GO/Metal/metal Oxide Nano-composites Applied for Nano Fluid Applications – A Review IJTSRD
The reduced graphene oxide (RGO) was fabricated by modified Hummers and chemical reduction methods. CRGO was characterized by X-ray diffraction, Scanning electron microscope and Raman Spectroscope. The stability, zeta potential, thermal conductivity and rheological properties of the as-prepared nanofluids were systematically investigated using different experimental methods. Metal/RGO, metal oxide/RGO nano composite was prepared by Ultrafine […]