To Study the Effect of Stress Concentration Factor on Mild Steel Due to Heat Treatment IJTSRD
The present work is to study the effect of various types of heat treatment processes on stress concentration factor (Kt) of a plate with a circular hole subjected to a uniform loading. Finite Element Analysis using ABAQUS 6.13-1 has been done in order to calculate, Kt for rectangular plates with holes of different diameters. Stress-Strain diagrams are generated from standard tensile specimens (ASTM E8) with Universal Testing machine (HEICO), before and after various types of heat treatment process. Young’s Modulus, Poisson’s Ratio and the Plastic strain verses Stress are calculated from the Stress- strain diagram and feed as an Input parameter for the FEA analysis. The results shows that the value of Kt for quenching has a higher value in comparison to room temperature mild steel specimen and the value of Kt for normalizing and annealing show a lower value in comparison to room temperature mild steel specimen.
by Aman Roy | Ranik Das | Pratick Chand Samanta | K. Bhattacharyya”To Study the Effect of Stress Concentration Factor on Mild Steel Due to Heat Treatment”
Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-6 , October 2017,
To Study the Effect of Stress Concentration Factor on Mild Steel Due to Heat Treatment IJTSRD IEEE PAPER
Hydro-Pneumatic Suspension with Intelligent Active Suspensioning System IJTSRD
A Study on “Radar Helmet for Soldiers” IJTSRD