Performance Evaluation of Coating Materials and Process Parameters Optimization for Surface Quality During Turning of Aisi 410 Austenitic Stainless Steel IJTSRD
Stainless steel SS is used for many commercial and industrial applications owing to its high resistance to corrosion. It is too hard to machine due to its high strength and high work hardening property. A surface property such as surface roughness SR is critical to the function-ability of machined components. Stainless steel is generally regarded […]
Optimization of Dry End Milling Process Parameters of Al-6063 Alloy Using Taguchi Method IJTSRD
This paper presents on optimizing the end milling process parameters based on the Taguchi method to minimize surface roughness and Tool wear for the work piece of Al-6063 alloy with high speed steel. The input parameters are speed (rpm), feed rate (mm/min) and depth of cut (mm). S/N ratio is calculated by using Taguchi method […]
Experimental Investigation on Surface Roughness and Vibration Parameters in Turning of EN8K steel using PTFE / Nylon66 Liners for Carbide Insert Cutting Tools IJTSRD
Reliable vibration reduction method is one of the important aspects for achieving a good dimensional accuracy and surface finish during turning operation in a manufacturing system. An effort is being made to minimize vibration in order to improvise surface finish and dimensional tolerance in lathe dry turning process by passive damping technique. In the present […]